News

Tips for choosing bathroom accessories and maintenance tips

Update:2021-12-20
Abst:1.Choose hardware accessories, whose models, specifications and performances must comply with the relevant provisions of the current national standard...

1.Choose hardware accessories, whose models, specifications and performances must comply with the relevant provisions of the current national standards, and match the selected sanitary ware for supporting use.

2. The sliding hinges on the windows must not be made of aluminum alloy materials, and stainless steel materials are better, because the hardness of stainless steel is better than aluminum alloy.

3. Generally, the shower door of the shower room in the bathroom adopts a sliding method. If it is a sliding door with a width of more than 1m, or a double-glazed shower door, it is more suitable to install double pulleys, or use rolling pulleys to ensure that the shower door is easy to use unobstructed.

4. After installation of bathroom hardware, attention should be paid to prevent rust and corrosion. Open and close lightly in daily use to prevent hard opening and hard closing, which may cause damage.

5. When installing hardware with fastening screws, a metal lining plate must be installed inside, and the thickness of the lining plate should be at least twice the pitch of the fasteners. It must not be fastened to plastic profiles, and non-metallic linings must not be used. Bathroom hardware in modern homes usually includes soap nets, soap dishes, mouthwash cup holders, towel rings, towel racks, bath towel racks, paper towel racks, clothes hooks, racks, etc. These small accessories have various shapes, rich materials, and differentiation. The configuration meets the different needs of consumers. The plot teaches you to understand the elements of bathroom hardware: Material: all copper, stainless steel, aluminum and copper-zinc alloys, etc., all copper (big expensive), aluminum (easy to oxidize) are not recommended, not copper Steel 304 has high durability and beautiful alloy. Pipe fittings: hollow pipes and solid pipes. After all, these are light items for hanging bath towels, towels, toilet paper, holding, washing, and cosmetics. The hollow pipes are enough.
How to judge the quality of the coating:

Take a look: Generally speaking, the brighter and more delicate the surface, the more obvious the mirror effect and the better the coating process;
Second listening: listen to the introduction of several brand shopping guides, mainly the introduction of plating. Good bathroom hardware has not only undergone early polishing, polishing, and dust removal, but also up to six or seven layers of nickel and chrome plating. Process, the more plating layer, the better the quality
; Three-grip: You can use the method of grip to see the quality of the material. Some businesses will use cast iron material to pretend to be copper or copper-zinc alloy hardware. After holding the hardware for two or three seconds, release it, and the fog and traces will disappear quickly. It can be judged to be copper. If the fog and traces remain for a long time, the material is likely to be non-copper.
CONTACT US