Three Tips For Waterproofing The Shower Room

Abst: As the life of each family is getting better and better, many families will separate the wet and dry shower room, but many families report that no ma...
As the life of each family is getting better and better, many families will separate the wet and dry shower room, but many families report that no matter how much water is made in the bathroom, the water will flow out, or the wall will flow after a few years. The skin fell off, why is this? Waterproofing was done during the renovation, but have you really done it right about the waterproofing of the shower room? What do you know about how to do waterproof shower room? Is your shower room waterproof coating really useful? Today, I have a small editor to show you some tips on waterproofing shower rooms.
1. Waterproof coating
Regarding waterproof coatings, we should choose polyurethane coatings, which are the best waterproof coatings on the market. We can't choose cheap waterproof paint for the waterproof treatment of the bathroom. If we find that the bathroom is leaking later, it will be very troublesome to try to remedy it. Not only do we need to pay attention to the choice of paint, but we also need to pay attention when applying waterproof paint. We need to choose dry weather to apply the paint. When applying waterproof paint, we must first paint the primer. If the primer is painted, we must check whether the ground is flat or not. Irregularities and need to be repaired. When we apply waterproof coating, we need to apply it repeatedly, and we must not let the corners of the bathroom. You need to apply it to every place. After painting the floor, it is generally recommended that the wall should also be applied. Apply a waterproof layer of about 30 cm.
2. Water retaining strip
In addition to waterproof coatings, is there any way to waterproof the shower room? We can also install waterproof strips in the bathroom and shower. This is generally recommended for families with larger bathrooms. We can use the water retaining strip with glass or shower curtain. Of course, the water retaining strip is also divided into plastic water retaining strips and stone water retaining strips. If we choose plastic water retaining strips, we generally need to use it with glass. If we choose a stone water retaining strip, it can be used with glass or with shower curtain. The installation of the water retaining bar is generally recommended to be about 5 to 7 cm above the ground. After the water retaining bar is installed, we need to check whether the water can really be blocked. After success, be careful every time you enter the shower room. Tripped underfoot.
3. Separate shower room
If your bathroom is installed with a separate shower room, then the first step is to check whether its glass and water seepage are intact during installation. The second step is to block the drain pipe and let it go for about three hours to check whether there is any leakage. If there is any leakage, you need to contact the manufacturer of the shower room as soon as possible.